3 Gallon 250mm 9.8" Stainless Steel Vacuum Degassing Chamber PC Lid from USA

Description

Company Information
Products
Order Information
FAQ
Contact Us
Store Categories
Store Categories
Glass Reactor
Rotary Evaporator
2L
5L
10L
20L
50L
Accessories
Short Path
Short Path Kit
Parts & Accessories
Vacuum Chamber Kits
Aluminum Chambers
Stainless Steel Chambers
Vacuum Chamber with Pumps
VC20S Kits (1.6 Gallon)
VC20S10 Kits (0.8 Gallon)
VC24A Kits (2.9 Gallon)
VC25S Kits (3.2 Gallon)
VC30S Kits (5.5 Gallon)
VC30S45 Kits (8.4 Gallon)
Vacuum Pump
Rotary Vane Pumps
Water-jet Aspirators
Molecular Distillation
Vacuum Drying Oven
Chiller /Heater
Vacuum Filter
Other
Photo Gallery
Product Description
This listing is for a 3.2 gallon (12.3 Liter, 25 cm diameter x 25 cm depth chamber) LAB1ST brand stainless steel vacuum chamber. (We also have different pumps available in our store.)
It is in stock and ready to ship from California,for non-US customers we may ship this unit from our warehouse in Shanghai.
Read before placing order:
Precaution for wood turning: Stabilizing resin (such as Cactus Juice) can be corrosive to the lid of vacuum chamber, please be cautious and avoid direct contact between lid and resin.
Product Features of Vacuum Chamber:
Stainless steel chamber with welded handles for long-term air-tightness performance. (Typical through-hole handles might lead to leakage after long-term operation.)
Our chamber has a rounded edge at the top, for the protection of silicone gasket.
Vacuum gauge is assembled on a separate port, so that the reading remains accurate even while pumping/venting the chamber.
Gauge reading in both inHg and Mpa.
All kits are vacuum tested for 24 hours before packaging. (leakage less than 2.0 inHg @ 24 hours)
Two-sided flippable vacuum gasket for better durability and reliability.
The gasket is chemically resistant to butane and other solvents.
1/2″ thickness Polycarbonate lid is light-weight, but 30x tougher than Acrylic.
Strong elastic food grade silicone vacuum hose can connect/disconnect easily with the pump/chamber.
50um air filter on the vent valve to reduce air flow and prevent any dust/powder flowing into the chamber.
Easy to install and low-cost to maintain: the chamber can be assembled in 5 minutes.
45 day complimentary warranty and life-long parts support.
All questions will be answered in 12 hours.
Product Specs & Part List of the Chamber:
Vacuum Chamber:
stainless steel, 25 x 25 cm (9.8 x 9.8″), with welded handles, 3.2 Gallon.
Lid:
Polycarbonate, 1/2″ thickness, 30x tougher than Acrylic.
Vacuum Gasket:
silicone, resistant to Butane and other solvents.
Vacuum Gauge Assembly:
0.5 inHg accuracy.
Valve Assembly:
very high quality air-tight brass valves, with 50um filter on vent port.
Vacuum Hose:
3.3′ / 1 meter food grade collapse-proof silicone hose, 3 mm wall thickness (8 mm I.D, 14 mm O.D).
Vacuum Pump Adapter:
3/8“ hose barb to 1/4 SAE flare port.
Accessories:
1 x PTFE tape, 2 x screw nuts, 2 x washers, 2 x wrench, 2 x Viton O-rings.
Volume:
12.3 Liter / 3.2 Gallon.
Net Weight:
3.7 kg / 8.2 lb.
Dimension (W x D x H):
36 x 28 x 36 cm (14.2 x 11.0 x 14.2″).
The shipping cost calculated by eBay shopping cart is supposed to be accurate for most countries, but we still reserve the right to contact you within 24 hours to adjust shipping fee when necessary (Middle East, East Europe, etc).
Typical Shipping Period of EMS / e-EMS / DHL
EMS to Japan, Korea, Singapore: delivery in 2-4 business days.
EMS to USA, UK, France, Spain, Netherlands, Australia: delivery in 4-7 business days.
EMS to Canada, Brazil, Russia: delivery in 5-10 business days.
EMS to all other major countries: delivery within 2 weeks.
DHL to worldwide: delivery in 2-4 business days.
Order Information
Contact Us
Payment
Shipping
Returns
Warranty
Contact Us
Please feel free to contact us via eBay message or email, and we will reply ASAP within 12 hours.
Payment
We accept payments in Paypal, credit card or bank transfer.
Please contact us if you need our W-9 information.
Shipping
We ship worldwide. The shipping cost here is correct for customers in US only. Customers in all other countries please contact us for quote on shipping.
We ship via DHL or UPS from our warehouse in Shanghai. Please provide your phone number for successful delivery.
We are able to ship most of our standard products within 5 business days. Please contact us about lead time for customization.
If your package has clearly visible damages during shipment, please take photos for both the packaging and damaged product, have the driver document all damages, and contact us as soon as possible. We will file a claim with the shipping company. Please contact us within 7 days if any internal damages or malfunctions are found while you open the package and operate the product, we will send replacement for the damaged items.
If a package is not deliverable and returned to us, we will charge a restocking fee (typically 20% value). Please make sure you leave the correct shipping address, and pay attention to eBay messages after placing order. Tracking numbers will be uploaded right after shipment.
Returns
We have our money back guarantee on all our products.
The products can be shipped back to our warehouse in California or Shanghai.
Please return the product within 14 days in the original packaging and unused condition. This includes all accessories, user manuals, original packing, etc. For non-defective items returned, the buyer will be responsible for the initial and return shipping. Please make sure you contact us for detailed instructions before you sent it back, otherwise the package will be refused.
We do not accpet the return of customized products.
Warranty
Unless otherwise specified, our products are covered by a 1-year warranty from the date of purchase. We will replace any failed components at no charge to the customers for parts or shipping.
Note: Consumable components (like glassware,gaskets or vacuum seals) are not covered in the 1-year warranty.
Copyright ©  Labfirst Scientific Instruments Co., Ltd. All rights reserved.
Company Information
Products
Order Information
FAQ
Contact Us
Store Categories
Store Categories
Glass Reactor
Rotary Evaporator
2L
5L
10L
20L
50L
Accessories
Short Path
Short Path Kit
Parts & Accessories
Vacuum Chamber Kits
Aluminum Chambers
Stainless Steel Chambers
Vacuum Chamber with Pumps
VC20S Kits (1.6 Gallon)
VC20S10 Kits (0.8 Gallon)
VC24A Kits (2.9 Gallon)
VC25S Kits (3.2 Gallon)
VC30S Kits (5.5 Gallon)
VC30S45 Kits (8.4 Gallon)
Vacuum Pump
Rotary Vane Pumps
Water-jet Aspirators
Molecular Distillation
Vacuum Drying Oven
Chiller /Heater
Vacuum Filter
Other
Photo Gallery
Product Description
This listing is for a 3.2 gallon (12.3 Liter, 25 cm diameter x 25 cm depth chamber) LAB1ST brand stainless steel vacuum chamber. (We also have different pumps available in our store.)
It is in stock and ready to ship from California,for non-US customers we may ship this unit from our warehouse in Shanghai.
Read before placing order:
Precaution for wood turning: Stabilizing resin (such as Cactus Juice) can be corrosive to the lid of vacuum chamber, please be cautious and avoid direct contact between lid and resin.
Product Features of Vacuum Chamber:
Stainless steel chamber with welded handles for long-term air-tightness performance. (Typical through-hole handles might lead to leakage after long-term operation.)
Our chamber has a rounded edge at the top, for the protection of silicone gasket.
Vacuum gauge is assembled on a separate port, so that the reading remains accurate even while pumping/venting the chamber.
Gauge reading in both inHg and Mpa.
All kits are vacuum tested for 24 hours before packaging. (leakage less than 2.0 inHg @ 24 hours)
Two-sided flippable vacuum gasket for better durability and reliability.
The gasket is chemically resistant to butane and other solvents.
1/2″ thickness Polycarbonate lid is light-weight, but 30x tougher than Acrylic.
Strong elastic food grade silicone vacuum hose can connect/disconnect easily with the pump/chamber.
50um air filter on the vent valve to reduce air flow and prevent any dust/powder flowing into the chamber.
Easy to install and low-cost to maintain: the chamber can be assembled in 5 minutes.
45 day complimentary warranty and life-long parts support.
All questions will be answered in 12 hours.
Product Specs & Part List of the Chamber:
Vacuum Chamber:
stainless steel, 25 x 25 cm (9.8 x 9.8″), with welded handles, 3.2 Gallon.
Lid:
Polycarbonate, 1/2″ thickness, 30x tougher than Acrylic.
Vacuum Gasket:
silicone, resistant to Butane and other solvents.
Vacuum Gauge Assembly:
0.5 inHg accuracy.
Valve Assembly:
very high quality air-tight brass valves, with 50um filter on vent port.
Vacuum Hose:
3.3′ / 1 meter food grade collapse-proof silicone hose, 3 mm wall thickness (8 mm I.D, 14 mm O.D).
Vacuum Pump Adapter:
3/8“ hose barb to 1/4 SAE flare port.
Accessories:
1 x PTFE tape, 2 x screw nuts, 2 x washers, 2 x wrench, 2 x Viton O-rings.
Volume:
12.3 Liter / 3.2 Gallon.
Net Weight:
3.7 kg / 8.2 lb.
Dimension (W x D x H):
36 x 28 x 36 cm (14.2 x 11.0 x 14.2″).
The shipping cost calculated by eBay shopping cart is supposed to be accurate for most countries, but we still reserve the right to contact you within 24 hours to adjust shipping fee when necessary (Middle East, East Europe, etc).
Typical Shipping Period of EMS / e-EMS / DHL
EMS to Japan, Korea, Singapore: delivery in 2-4 business days.
EMS to USA, UK, France, Spain, Netherlands, Australia: delivery in 4-7 business days.
EMS to Canada, Brazil, Russia: delivery in 5-10 business days.
EMS to all other major countries: delivery within 2 weeks.
DHL to worldwide: delivery in 2-4 business days.
Order Information
Contact Us
Payment
Shipping
Returns
Warranty
Contact Us
Please feel free to contact us via eBay message or email, and we will reply ASAP within 12 hours.
Payment
We accept payments in Paypal, credit card or bank transfer.
Please contact us if you need our W-9 information.
Shipping
We ship worldwide. The shipping cost here is correct for customers in US only. Customers in all other countries please contact us for quote on shipping.
We ship via DHL or UPS from our warehouse in Shanghai. Please provide your phone number for successful delivery.
We are able to ship most of our standard products within 5 business days. Please contact us about lead time for customization.
If your package has clearly visible damages during shipment, please take photos for both the packaging and damaged product, have the driver document all damages, and contact us as soon as possible. We will file a claim with the shipping company. Please contact us within 7 days if any internal damages or malfunctions are found while you open the package and operate the product, we will send replacement for the damaged items.
If a package is not deliverable and returned to us, we will charge a restocking fee (typically 20% value). Please make sure you leave the correct shipping address, and pay attention to eBay messages after placing order. Tracking numbers will be uploaded right after shipment.
Returns
We have our money back guarantee on all our products.
The products can be shipped back to our warehouse in California or Shanghai.
Please return the product within 14 days in the original packaging and unused condition. This includes all accessories, user manuals, original packing, etc. For non-defective items returned, the buyer will be responsible for the initial and return shipping. Please make sure you contact us for detailed instructions before you sent it back, otherwise the package will be refused.
We do not accpet the return of customized products.
Warranty
Unless otherwise specified, our products are covered by a 1-year warranty from the date of purchase. We will replace any failed components at no charge to the customers for parts or shipping.
Note: Consumable components (like glassware,gaskets or vacuum seals) are not covered in the 1-year warranty.
Copyright ©  Labfirst Scientific Instruments Co., Ltd. All rights reserved.
On Jul-08-20 at 02:05:11 PDT, seller added the following information: